User manual

Communication with the Automation System
33003962 11/2011 141
Viewing or Ignoring Alarms
Overview
When an alarm occurs, it is automatically displayed on the display unit.
An alarm is displayed blinking
You can now view and acknowledge the alarm or you can ignore the alarm.
Viewing Alarms
To view the alarm, use the keys of your XBT terminal as described below:
Key Description
Scroll through the alarm panel (up to 25 lines).
Scroll through the list of alarm panels.
Press the ENTER key to acknowledge the alarm on the display. The alarm
message stops blinking and changes to a steady display.
Press the ESC key to exit viewing alarm panels.