User manual

Magelis XBT OT User Manual
5-2
5.1 Cleaning the Display
When the surface or frame of the display become dirty, soak a soft cloth in water with a neutral detergent,
wring the cloth tightly, and wipe the display.
5.2 Periodic Check Points
To keep your OT unit in its best condition, please inspect the following points periodically.
 OT Operation Environment
 Is the operating temperature within the allowable range (0ºC to 50ºC [-32 to 122ºF])?
 Is the operating humidity within the specified range (10%RH to 90%RH, dry bulb temperature of
39ºC[102ºF] or less)?
 Is the operating atmosphere free of corrosive gasses?
When using the OT unit inside a panel, the ambient environment refers to the interior of the panel.
 Electrical Specifications
 Is the input voltage appropriate?
19.2 to 28.8 VDC
 Related Items
 Are all power cords and cables connected properly? Have any become loose?
 Are all mounting brackets holding the unit securely?
 Are there many scratches or traces of dirt on the installation gasket?
CAUTION
EQUIPMENT DAMAGE
• Do not use hard or pointed objects to operate the touch-screen panel, since it can damage the
panel surface.
• Do not use paint thinner, organic solvents, or a strong acid compound to clean the unit.
Failure to follow these instructions can result in injury or equipment damage.