User manual

Magelis XBT OT User Manual
4-16
 Removal
To remove the clamp from the USB cables, push down on the clamp strap’s clip to release it while pulling up
on the clamp.
4.4.2 XBT OT4320 Series
 Attachment
(1) Before starting the procedure, lift up the tab on both sides of the USB Holder and remove the USB Cover .
(2) Attach the USB holder to the USB Host Interface part of the main unit. Hook a pick of the USB holder
to the attachment hole of the main unit and then insert the other (lower) pick to fix the USB holder.
(3) Insert the USB cable into the USB Host Interface.
Clamp
Clip
Tab
USB Cable