User manual

Chapter 4 Installation and Wiring
4-5
 Installing the OT
(1) Insert the OT into the panel cut, as shown.
(2) Mount four pieces of the panel-mounting
brackets on the right and left sides, or the
top and bottom sides of the panel to secure
the panel.
• Be sure to insert installation fasteners in the recessed portion of a installation
fasteners hole. (Refer to the following figure) If the fasteners are not correctly
attached, the OT unit may shift or fall out of the panel.
Installation Panel
Hook
Models that have the mounting bracket
holes on the sides
Models that have the mounting bracket holes
on the top and bottom
Slots
Slots
Left side
Right side
left and right
top and bottom