User manual

Magelis XBT OT User Manual
3-12
3.2 XBT OT4320 Series
3.2.1 General Specifications
 Electrical Specifications
 Environmental Specifications
Power Supply
Input Voltage 24 VDC
Rated Voltage 19.2 to 28.8 VDC
Allowable Voltage Drop 10ms (max.)
Power Consumption 22W (max.)
In-Rush Current 30A (max.)
Voltage Endurance
1000 VAC 20mA for 1 minute
(between charging and FG terminals)
Insulation Resistance
500 VDC 10MΩ (min.)
(between charging and FG terminals)
Physical
Surrounding Air
Temperature
0 to +50°C [32 to 122°F]
Storage Temperature -20 to +60°C [-4 to 140°F]
Ambient Humidity
10 to 90% RH
(Wet bulb temperature: 39°C[102°F] max. - no condensation.)
Storage Humidity
10 to 90% RH
(Wet bulb temperature: 39°C[102°F] max. - no condensation.)
Dust 0.1mg/m
3
and below (non-conductive levels)
Pollution Degree For use in Pollution Degree 2 environment
Atmosphere Free of corrosive gases
Air Pressure Vibration
Resistance
800 to 1114hPa
(2,000m[6557.4ft] above sea-level and below)
Mechanical
Vibration Resistance
IEC61131-2 compliant
5 to 9Hz single-amplitude 3.5mm[0.14in]
9 to 150Hz constant acceleration 9.8m/s
2
X,Y,Z directions for 10 cycle (100 minute)
Concussion Resistance
IEC61131-2 compliant
(147m/s
2
X,Y,Z directions for 3 times)
Electrical
Noise Immunity
Noise Voltage: 1000V
P-P
Pulse Duration: 1μs
Rise Time: 1ns
(via noise simulator)
Electrostatic Discharge
Immunity
6kV (complies with EN 61000-4-2 Level 3)