User manual

Magelis XBT OT User Manual
2-4
F: USB Host Interface (USB)
Complies with USB 1.1.
One port for TYPE-A connector.
Power supply voltage 5 VDC ±5%.
Maximum output current: 500mA
Maximum communication distance: 5m[16.4ft]
Interfaces to transfer cable, USB-compatible
printer, and such.
G: CF Card Cover
The CF Card interface and DIP Switches are
located inside the CF Card access area when the
cover is open. This cover must be closed when
accessing the CF Card.
H: DIP Switches
DIP
Switches
Function ON OFF
1
Install project from CF Card. CF Card
with project data required. Default
setting: OFF.
Enabled Disabled
2 Reserved - -
3
Enable Runtime Recovery. Default
setting: OFF.
Enabled, contact
customer support for
serial recovery cable
Disabled
4
Simulate cover closed, allowing card
to be read even if cover open. Default
setting: OFF.
Enabled Disabled
F
G
H
Bottom
(With CF Card Cover open)
1
2
3
4
ON