User manual

Magelis XBT OT User Manual
2-2
2.1 XBT OT2110/2210 Series
A: Status LED
This LED indicates the OT’s status, e.g. power
input, firmware RUN status.
B: Power Plug Connector
C: USB Host Interface (USB)
Complies with USB 1.1.
One port for TYPE-A connector.
Power supply voltage 5 VDC ±5%.
Maximum output current: 500mA
Maximum communication distance: 5m[16.4ft]
Interfaces to transfer cable, USB-compatible
printer, and such.
D: Serial Interface (COM1)
RS-232C serial interface.
9-pin SUB-D plug type connector.
E: Serial Interface (COM2)
RS-422/RS-485 serial interface.
9-pin SUB-D plug type connector.
LED OT Operation
Green (lit)
Normal operation (power
is ON) or OFFLINE
operation.
Orange
(blinking)
During software startup.
Red (lit) Power is ON.
Not lit Power is OFF.
Front
A
B
C
Right side
D
E