Brochure

ManualsBrandsSCHNEIDER ELECTRIC ManualsContactorsContactor 1 pc(s) 1 m

Other versions: please consult our Customer Care Centre.

Connections

■ screw clamp terminals or connectors

Rated operational voltage 690 V

Rated operational current Ie max AC-3 (Ue ≤ 440 V) 9 A 12 A 18 A 25 A 32 A 38 A

Ie AC-1 (

θ ≤ 60° C) 25 A 32 A 40 A 50 A

Rated operational power 220/240 V 2.2 kW 3 kW 4 kW 5.5 kW 7.5 kW 9 kW

in category AC3 380/400 V 4 kW 5.5 kW 7.5 kW 11 kW 15 kW 18.5 kW

415/440 V 4 kW 5.5 kW 9 kW 11 kW 15 kW 18.5 kW

500 V 5.5 kW 7.5 kW 10 kW 15 kW 18.5 kW 18.5 kW

660/690 V 5.5 kW 7.5 kW 10 kW 15 kW 18.5 kW 18.5 kW

1000 V – – – – – –

Contactor type * LC1D09 LC1D12 LC1D18 LC1D25 LC1D32 LC1D38

Reversing contactor type * with mechanical interlock LC2D09 LC2D12 LC2D18 LC2D25 LC2D32 LC2D38

N spring terminals (1)

Add the ﬁgure 3 before the voltage code. Example: LC1D09P7 becomes LC1-093P7

N lug-clamps (2)

Add the ﬁgure 6 before the voltage code. Example: LC1D09P7 becomes LC1-096P7

N Faston connectors (3) 2 x 6.35 (power) and 1 x 6.35 (control) up to D12 only

Add the ﬁgure 9 before the voltage code. Example: LC1D09P7 becomes LC1-099P7

* Basic reference to be completed by adding the coil voltage code

Standard control circuit voltages

a supply

Volts 24 42 48 110 115 220 230 240 380 400 415 440 500

Contactors LC1D09…D150 (coils D115 and D150 with integral suppression device ﬁtted as standard)

50/60 Hz B7 D7 E7 F7 FE7 M7 P7 U7 Q7 V7 N7 R7 S7

Contactors LC1D80…D115

50 Hz B5 D5 E5 F5 FE5 M5 P5 U5 Q5 V5 N5 R5 S5

60 Hz B6-E6F6-M6-U6Q6--R6-

c supply

Volts 12 24 36 48 60 72 110 125 220 250 440

Contactors LC1D09…D65A (coils with integral suppression device ﬁtted as standard)

U 0.75…1.25 Uc JD BD CD ED ND SD FD GD MD UD RD

Contactors LC1D80…D95

U 0.85…1.1 Uc JD BD CD ED ND SD FD GD MD UD RD

U 0.75…1.2 Uc JW BW CW EW - SW FW - MW - -

Contactors LC1D115 and D150 (coils with integral suppression device ﬁtted as standard)

U 0.75…1.2 Uc - BD - ED ND SD FD GD MD UD RD

Low consumption

Contactors LC1D09…D38 (coils with integral suppression device ﬁtted as standard)

Volts c 5 12 20 24 48 110 120 250

U 0.7…1.25 Uc AL JL ZL BL EL FL ML UL

Example of complete reference: LC1D09P7

TeSys D

Contactors

0.06…75 kW

(1) (3)(2)

Summary of content (4 pages)

PAGE 1
TeSys D Contactors 0.06…75 kW Connections ■ screw clamp terminals or connectors Rated operational voltage Rated operational current 690 V Ie max AC-3 (Ue ≤ 440 V) 9A Ie AC-1 (θ ≤ 60° C) 25 A 12 A 18 A 25 A 32 A 32 A 40 A 50 A 38 A Rated operational power 220/240 V 2.2 kW 3 kW 4 kW 5.5 kW 7.5 kW 9 kW in category AC3 380/400 V 4 kW 5.5 kW 7.5 kW 11 kW 15 kW 18.5 kW 415/440 V 4 kW 5.5 kW 9 kW 11 kW 15 kW 18.5 kW 500 V 5.5 kW 7.5 kW 10 kW 15 kW 18.5 kW 18.
PAGE 2
1000 V on a supply, 690 V on c supply 690 V 40 A 50 A 65 A 80 A 60 A 80 A 80 A 125 A 95 A 115 A 150 A 11 kW 15 kW 18.5 kW 22 kW 25 kW 30 kW 40 kW 18.
PAGE 3
TeSys D Contactors Auxiliary contacts Contact type instantaneous, connection by screw terminals Block mounting Front mounting References Contact Side mounting 1 NO LADN10 – 1 NC LADN01 – 1 NO + 1 NC LADN11 LAD8N11 2 NO LADN20 LAD8N20 2 NC LADN02 LAD8N02 2 NO + 2 NC LADN22 – 1 NO + 3 NC LADN13 – 3 NO + 1 NC LADN31 – 4 NO LADN40 – 4 NC LADN04 – Contact type Time delay, connection by screw terminals Block mounting Front mounting Temporisation References 0.1…3 s 0.
PAGE 4
TeSys D Contactors Suppressor modules Type of module RC circuits (Resistor-Capacitor) Mounting Side clip-on Front clip-on For use with contactor D09…D38(3P) DT20…DT40(4P) D40A…D65A(3P) DT60A…DT80A(4P) D80…D150(3P) D40…D115(4P) References Voltage Screw ﬁxing 24…48 VAC LAD4RCE LAD4RC3E LA4DA2E 50…127 VAC LAD4RCG LAD4RC3G LA4DA2G 110…240 VAC LAD4RCU LAD4RC3U LA4DA2U 380…415 VAC – LAD4RC3N LA4DA2N Screw ﬁxing Type of module Varistors (peak limiting) Mounting Side clip-on Front