Datasheet
Power circuit : spring terminal 1 cable 2.5 mm² -
cable stiffness: flexible - without cable end
Power circuit : spring terminal 2 cable 2.5 mm² -
cable stiffness: flexible - without cable end
Control circuit : screw clamp terminal 2 cable
1...2.5 mm² - cable stiffness: flexible - with cable
end
Power circuit : screw clamp terminal 2 cable
1...2.5 mm² - cable stiffness: flexible - with cable
end
Control circuit : screw clamp terminal 1 cable 1...4
mm² - cable stiffness: flexible - without cable end
Control circuit : screw clamp terminal 1 cable 1...4
mm² - cable stiffness: flexible - with cable end
Power circuit : screw clamp terminal 1 cable 1...4
mm² - cable stiffness: flexible - without cable end
Power circuit : screw clamp terminal 2 cable 1...4
mm² - cable stiffness: flexible - without cable end
Power circuit : screw clamp terminal 1 cable 1...4
mm² - cable stiffness: flexible - with cable end
Control circuit : ring lugs - external diameter: 8 mm
Power circuit : ring lugs - external diameter: 8 mm
Power circuit : ring lugs - external diameter: 8 mm
Quantity per set
Set of 10
Complementary
Coil technology
Without built-in bidirectional peak limiting diode suppressor
Protective cover
With
Auxiliary contact composition
1 NO + 1 NC
Control circuit voltage limits
0.3...0.6 Uc at 60 °C drop-out 50/60 Hz
0.8...1.1 Uc at 60 °C operational 50 Hz
0.85...1.1 Uc at 60 °C operational 60 Hz
[Ui] rated insulation voltage
600 V for control circuit certifications CSA
600 V for control circuit certifications UL
600 V for power circuit certifications CSA
600 V for power circuit certifications UL
690 V for control circuit conforming to IEC 60947-4-1
690 V for power circuit conforming to IEC 60947-4-1
[Uimp] rated impulse withstand voltage
6 kV conforming to IEC 60947
Overvoltage category
III
Mounting support
Plate
Rail
Flame retardance
V1 conforming to UL 94
Tightening torque
Power circuit : 1.7 N.m - with screwdriver Philips No 2
Control circuit : 1.7 N.m - with screwdriver Philips No 2
Control circuit : 1.7 N.m - with screwdriver flat Ø 6 mm
Power circuit : 1.7 N.m - with screwdriver flat Ø 6 mm
[Ue] rated operational voltage
<= 690 V AC 25...400 Hz for power circuit
[Ith] conventional free air thermal current
10 A at <= 60 °C for control circuit
25 A at <= 60 °C for power circuit
Irms rated making capacity
140 A AC for control circuit conforming to IEC 60947-5-1
250 A at 440 V for power circuit conforming to IEC 60947
Rated breaking capacity
250 kA at 440 V for power circuit conforming to IEC 60947
Associated fuse rating
10 A gG for control circuit conforming to IEC 60947-5-1
20 A at <= 690 V coordination type 2 for power circuit
25 A at <= 690 V coordination type 1 for power circuit
Average impedance
2.5 mOhm at 50 Hz - Ith 25 A for power circuit
Power dissipation per pole
0.2 W AC-3
1.56 W AC-1
Inrush power in VA
70 VA at 20 °C (cos f 0.75)
Hold-in power consumption in VA
7 VA at 20 °C (cos f 0.3) 50/60 Hz
Operating time
4...19 ms opening
12...22 ms closing
Safety reliability level
B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1
B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO
13849-1
Mechanical durability
15000000 cycles
Operating rate
3600 cyc/h at <= 60 °C
2 / 3