User`s manual

Assembly and Cable Connection
37
Connection of Remote Bus Cable, Copper Cable
Using Copper
Cable
Prefabricated cables are available in 3 different lengths for the remote bus, see
Overview of Ordering Information, p. 50. Each cable has two plugs for the
connection of two neighboring modules.
All other cable lengths must be made by the customer themselves, see Preparation
of the Remote Bus Cable, using Copper Wiring, p. 39.
Location of the
connector plug
for the remote
bus cable
(170 INT 110 03)
Location of the interfaces on the bus adapter 170 INT 110 03:
1 I/O module
2 INTERBUS adapter
3 Plug for incoming bus (pin)
4 Plug for outgoing bus (socket)
3
2
1
4
Front
Back