User`s manual

Assembly and Cable Connection

Mounting the I/O

Module

The I/O module can be mounted on a DIN rail, or secured to a wall or a machine

housing with just two screws.

A spring integrated into the backplane establishes an electrical ground contact with

the mounting rail.

For mounting on the mounting rail, an additional earth connection from the PE screw

of the module to the mounting rail must be made.

Diagram of the wall and DIN rail mounting:

Note: Please carefully observe the detailed notes about mounting and grounding

of the modules in the user's manual for the Momentum product family I/O units. For

ordering information, refer to the section Additional Documentation.

Wall mounting Mounting rail