User`s manual

Assembly and Cable Connection

Mounting of the Bus Adapter

Mounting the

Bus Adapter

The bus adapter is connected to the I/O unit with a plug. The spring clips serve as a

lock and insure a mechanically secure fit.

Diagram to show how to mount the bus adapter onto the I/O unit:

1 I/O unit

2 Connecting plug (ATI interface)

3 Bus adapter (with 1 or 2 bus plugs depending on the bus type)

4 Spring clips

CAUTION

The I/O module corresponds to protection type IP20. i.e. these

modules must be mounted in enclosed switch cabinets in

electrical equipment rooms.

When working at switch cabinets, the user must electrically discharge

themselves to protect the modules from electrostatic charges.

Failure to observe this precaution can result in injury or

equipment damage.

1 2