User`s guide

Bulletin No. VVDED397053US Section 2 — Software Set-Up

November 2000 Interbus-S Protocol

Get-OV

This is used to display how the parameters listed in Tables 8 and 9 on

pages 19 and 20 are setup.

Identify

This is used to identify the device, and is comprised of three types of data

as shown in Table 12.

Read/Write

This is used to read or write the value of a drive controller or Drivecom

object via its index and sub-index. The ATV58 Register Access Guide for

Communication Networks, VVDED397058US provides information for

making the connection between the index/sub-index and the drive

controller or Drivecom object details.

Table 11: Word 483 Display Register

Word Code Description Possible Values or Range

W483

0x5FE8/34

DF1

faults no. 1 (no fault

if the bits = 0)

Bit 0 = 1: Incorrect calibration constants (INF)

Bit 1 = 1: Unknown drive controller rating (INF)

Bit 2 = 1: Unknown or incompatible option (INF)

Bit 3 = 1: HD (ASIC) initialization incorrect (INF)

Bit 4 = 1: EEPROM control board fault (EEF)

Bit 5 = 1: EEPROM power board fault (EEF)

Bit 6 = 1: Incorrect configuration (CFF)

Bit 7 = 1: Invalid configuration (CFI)

Bit 8 = 1: Normal communication link fault (SLF)

Bit 9 = 1: Fast communication link fault (ILF)

Bit 10 = 1: Fast communication “NET” fault (CNF)

Bit 11 = 1: External fault via normal serial link

(EPF)

Bit 12 = 1: External fault via fast serial link (EPF)

Bit 13 = 1: Motor short circuit fault (SCF)

Bit 14 = 1: Precharge relay closure too long

(CRF)

Bit 15 = 1: Precharge relay command cut-off

(CRF)

Table 12: Types of Identify Data

Name of Device Manufacturer Schneider Electric

Name of Model ATV58••••••

Device Version Number Example: V1.0

VVDED397053USBook Page 21 Tuesday, November 28, 2000 9:01 AM