User`s guide

Section 2 — Software Set-Up Bulletin No. VVDED397053US

Set-Up with IBS PC Software November 2000

3. Click on the Parameter Channel button and change the Message

Lengths Transmit and Receive parameters to 128 bytes.

4. Add the Get-OD service to the Supported Parameter Channel

Services list.

Configuration of the Edit/Insert Function

An ATV58 drive controller can be inserted into a project using the

Edit/Insert with Device Description function.

To edit or insert devices:

The Schneider Automation (ASA) *.mbd catalog is located in the

C:\IBSCMD\BIN directory and the icons specific to Schneider devices

are located in the C:\IBSCMD\PICTURE directory.

If you have the Schneider catalog and icons file, make the following

screen selections:

— Data Source: Other, External_Device_Database

— Group: SE and Search button

— Output: Type ALTIVAR 58, OK

If you do not have the Schneider catalog and icons file, make the

following screen selections:

— Data Source: Internal Database

— Group: Drivecom and Search button

— Output: Type Profile 21 (RB), OK

The bookmark for the description appears. Click on Parameter

Channel, change the Message Lengths Transmit and Receive

parameters to 128 bytes and add the Get-OD service to the

Supported Parameter Channel Services list.

After you have edited all the devices you wish to add to the project, the

next step depends on whether or not the PLC controller board contains

parameter memory.

• If it does, click on Parameterization Memory and Save. The board must

have been previously formatted using Format.

• If it does not have parameter memory, right-click on the Controller

Board icon, then Parameterization, Execute.

The CMD software switches to Online operating status in both cases

following successful parameterization. In Monitoring operating status the

drive controller can be controlled using Drivecom Monitor and Digital

Process Data Monitor.

VVDED397053USBook Page 16 Tuesday, November 28, 2000 9:01 AM