User`s guide

Section 2 — Software Set-Up Bulletin No. VVDED397053US
Parameter Configuration November 2000
14
© 2000 Schneider Electric All Rights Reserved
The PLC program must be written in accordance with the predefined
configuration (Drivecom Profile 21) to access the drive controller. The
card is considered to be a standard I/O interface.
Figure 7: Network Diagram
ALTIVAR 58
Drive Controller
ALTIVAR 58
Drive Controller
Phoenix Contact
Interbus-S module card
for programmable logic controller (PLC)
RS-485 Bus
PC
RS-232
In Out
In Out
Personal computer using
Phoenix Contact IBS CMD G4
software for configuring and
programming the logic controller.
+24 Vdc
0 V
+24 Vdc
0 V
VVDED397053USBook Page 14 Tuesday, November 28, 2000 9:01 AM