Specifications

Advanced Configuration Features
92
31004624 8/2009
STB NIB 2212 Configurable Parameters
Introduction
This topic discusses the configuration of INTERBUS NIM parameters using the
Advantys configuration software.
The following operating parameters are user configurable:
z data size (in words) of PLC output data transmitted to the HMI panel and HMI
input data sent to the PLC
z maximum node ID for the last CANopen device
General Information
To get general information about the NIM module (model name, version number,
vendor code, etc.):
Accessing Configurable Parameters
To access the NIM values that are configurable:
Step Action Comment
1 Open your configuration with the
Advantys configuration software.
The NIM is the leftmost module in your island
assembly.
2 Double-click on the NIM in the
configuration workspace.
The module editor window appears.
3 Select the General tab. The General tab gives general information
about the NIM.
Step Action Comment
1 Double-click the NIM module in the
configuration workspace.
The module editor window appears.
2 Select the Parameters tab. Configurable parameters are on this tab.
3 In the Parameter name column,
expand the Additional Info Store List by
clicking on the plus (+) sign.
The configurable NIM parameters become
visible.