Specifications

Application Example

31004624 8/2009

Sample Island Assembly

Introduction

To complete the configuration example(s) in this chapter, you will need to implement

a particular Advantys STB island assembly. Your island assembly is independent of

the network’s master scanner because the island is represented by the NIM as a

single node on the fieldbus network.

Sample Island Assembly

The sample I/O system used in this chapter’s application example(s) implements a

variety of analog and digital modules.

The following Advantys STB island modules are used in the example(s):

1 STB NIB 2212, INTERBUS NIM

2 STB PDT 3100, 24 VDC Power Distribution Module

3 STB DDI 3230, 24 VDC 2-channel digital input module (2 bits of data, 2 bits of status)

4 STB DDO 3200, 24 VDC 2-channel digital output module (2 bits of data, 2 bits of echo

output data, 2 bits of status)

5 STB DDI 3420, 24 VDC 4-channel digital input module (4 bits of data, 4 bits of status)

6 STB DDO 3410, 24 VDC 4-channel digital output module (4 bits of data, 4 bits of echo

output data, 4 bits of status)

7 STB DDI 3610, 24 VDC 6-channel digital input module (6 bits of data, 6 bits of status)

8 STB DDO 3600, 24 VDC 6-channel digital output module (6 bits of data, 6 bits of echo

output data, 6 bits of status)

9 STB AVI 1270, +/-10 VDC 2-channel analog input module (16 bits of data [channel 1], 16

bits of data [channel 2], 8 bits of status [channel 1], 8 bits of status [channel 2])

10 STB AVO 1250, +/-10 VDC 2-channel analog output module (8 bits of status [channel 1],

8 bits of status [channel 2], 16 bits of data [channel 1], 16 bits of data [channel 2])

11 STB XMP 1100 termination plate