Specifications

The STB NIB 2212 NIM Module
31004624 8/2009 33
You can also password-protect a configuration (see page 106). If you do this,
however, the RST button is disabled and you are unable to use it to reset the port
parameters.
Connections
An STB XCA 4002 programming cable must be used to connect the computer
running the Advantys Configuration Software or a Modbus-capable HMI panel to the
NIM through the CFG port.
The STB XCA 4002 is a 2 m (6.23 ft) shielded, twisted-pair cable with an 8-
receptacle HE-13 (female) connector on one end that plugs into the CFG port and a
9-receptacle SUB-D (female) connector on the other end that plugs into a computer
or an HMI panel:
TXD transmit data
RXD receive data
DSR data set ready
DTR data terminal ready
RTS request to send
CTS clear to send
GND ground reference
N/C not connected