Specifications

The STB NIB 2212 NIM Module
22
31004624 8/2009
External Features of the STB NIB 2212 NIM
Introduction
The physical features critical to STB NIB 2212 INTERBUS NIM operations are
called out in the illustration below:
The features in the above illustration are described briefly in the following table:
Feature Function
1 fieldbus interface
(see page 25) (in)
Nine-pin SUB-D (male) connector used for the incoming
INTERBUS fieldbus network cable.
2 fieldbus interface
(see page 25) (out)
Nine-pin SUB-D (female) connector used for the outgoing
INTERBUS fieldbus network cable.
3 power supply interface
(see page 35)
A two-receptacle connector (see page 35) for connecting an
external 24 VDC power supply to the NIM.
4 LED array
(see page 27)
Colored LEDs that use various patterns to visually indicate the
operational status of the island bus.
5 release screw A mechanism used to remove the NIM from the DIN rail. (See
the Advantys STB System Planning and Installation Guide for
details.)