Specifications

Glossary
140
31004624 8/2009
A
agent
1. SNMP – the SNMP application that runs on a network device.
2. Fipio – a slave device on a network.
analog input
A module that contains circuits that convert analog DC input signals to digital values
that can be manipulated by the processor. By implication, these analog inputs are
usually direct. That means a data table value directly reflects the analog signal
value.
analog output
A module that contains circuits that transmit an analog DC signal proportional to a
digital value input to the module from the processor. By implication, these analog
outputs are usually direct. That means a data table value directly controls the analog
signal value.
application object
In CAN-based networks, application objects represent device-specific functionality,
such as the state of input or output data.
ARP
The ARP (address resolution protocol) is the IP network layer protocol, which uses
ARP to map an IP address to a MAC (hardware) address.
auto baud
The automatic assignment and detection of a common baud rate as well as the
ability of a device on a network to adapt to that rate.
auto-addressing
The assignment of an address to each Island bus I/O module and preferred device.
auto-configuration
The ability of Island modules to operate with predefined default parameters. A
configuration of the Island bus based completely on the actual assembly of I/O
modules.