Specifications

Advanced Configuration Features
31004624 8/2009 115
Node Configuration
The next eight contiguous registers (registers 45359 through 45366) display
locations where modules have been configured on the island bus. This information
is stored in Flash memory. At start up, the actual locations of the modules on the
island are validated by comparing them to the configured locations stored in
memory. Each bit represents a configured location:
z A value of 1 in a bit indicates that a module has been configured for the
associated location.
z A value of 0 in a bit indicates that a module has not been configured for the
associated location.
The first two registers, shown below, provide the 32 bits that represent the module
locations in a typical island configuration. The remaining six registers (45361
through 45366) are available to support island expansion capabilities.