Specifications
1
2
3
4
5
6
7
8
9
10
56
Modicon
™
Momentum
™
automation platform
In t e r Bus
™
communication adapters
Introduction
The In t e r Bu s
™
communication adapter for the Modicon
™
Momentum
™
I/O product
line provides a direct connection to the I
n t e r Bu s Network for the full family of
Modicon Momentum I/O modules. This connectivity enables Modicon Momentum
I/O to be used in open architecture control systems that utilize either a
programmable controller or industrial computer as the network master. In these
applications, I
n t e r Bu s serves as the communication network that connects Modicon
Momentum I/O modules, along with other In t e r Bu s compatible control devices, for
the communication of input and output information with a single master controller.
There are two types of I
n t e r Bu s adapters available:
170 INT 110 00, twisted pair media, SUPI 2
170 INT 110 03, twisted pair media, SUPI 3, supports G4 diagnostic
The I
n t e r Bu s communication adapter is designed to plug on to any of the Modicon
Momentum Input/Output module bases, thus allowing the I/O module to be accessed
over the In t e r Bu s Communication Network. Each Modicon Momentum I/O module is
an individual node or device on the In t e r Bu s network with its address set either by its
physical location on the network, or by menu-driven software that is available with
some I
n t e r Bu s master devices. In t e r Bu s is a cost-effective method of distributing
I/O modules throughout large plant areas. The gure below illustrates a typical
control system using Modicon Momentum I/O modules on the In t e r Bu s network, with
a Quantum PLC programmable controller as the network master.
Network Topology
Description
The 170 INT 110 0p In t e r Bu s communication adapters feature the following on the
front panel:
1 Two 9-Pin SUB-D connectors for connection to the In t e r Bu s bus
2 Area for Label (label shipped with I/O base)
3 LED Status Indicators for 170 INT 110 0p include:
UL (green), logic power check (- 170 INT 110 03 only)
BA (green), bus enabled-
RC (green), remote bus check-
RD (yellow), remote bus disabled-
1
3 2
Introduction,
description
12345678910 11 12 13 14 15 16 1234567891011 12 13 14 15 16 1234567891011 12 13 14 15 16
CPS 114 20
140
Xxxx Ixxx
CPU 343 00
140
Xxxx Ixxx
xxx xxx 00
140
Xxxx Ixxx
DDO 334 00
140
Xxxx Ixxx
xxx xxx 00
140
Xxxx Ixxx
xxx xxx 00
140
Xxxx Ixxx
12345678910 11 12 13 14 15 16
12345678910 11 12 13 14 15 16 1 234567891011 12 13 14 15 16
Modicon
™
Quantum
™
PLC with
140 NOA 622 00
I
n t e r Bu s module
Modicon Momentum I/O Modules
Third
Party
Products
Remote Bus Extension
Remote Bus Extension
Branch
Interface
Modicon
™
Momentum
™
I/O Modules
Remote Bus Remote Bus Remote BusRemote Bus
Remote Bus
Modicon Momentum I/O Modules