Specifications

1
2
3
4
5
6
7
8
9
10
48
Modicon
™
Momentum
™
automation platform
Ethernet TCP/IP communication adapters
Introduction
The Model 170 ENT 110 02 and 170 ENT 110 01 Ethernet communication adapters
for the Modicon
™
Momentum
™
I/O product line provide a direct connection to
Ethernet-based networks for the entire family of Modicon Momentum I/O modules.
This connectivity enables communications with a full range of Ethernet TCP/IP
compatible control products that includes: programmable controllers, industrial
computers, motion controllers, operator control stations, host computers, and other
controls. This communication network provides a exible, cost-effective solution for
communicating factory oor information to various layers of an integrated
manufacturing facility.
The 100BASE-TX Ethernet communication adapter, the 170 ENT 110 01 (and the
10BASE-T adapter, the 170 ENT 110 02) are single adapters designed to plug on to
any of the Modicon Momentum Input/Output module bases. Both are designed to
conform to the requirements of the Ethernet communication network.
The Ethernet IP addressing scheme allows an unlimited number of Modicon
Momentum I/O modules or wiring diagrams on the network. Using standard Ethernet
hubs, routers, and bridges, the performance and distance capability of the Ethernet
network can be tailored to meet the requirements of almost any control application.
The Ethernet communication adapter uses the standard Modbus
™
message
structure and control commands over the TCP/IP protocol. This simplies
implementation by control engineering, while providing information that can be
communicated over standard network media to enterprise applications.
Since Modbus on TCP/IP over Ethernet is supported by Schneider Electric’s
Modicon
™
Quantum
™
and Premium
™
controller families, Modicon Momentum I/O can
be added to existing control systems where additional I/O capacity of a distributed
I/O sub-network is needed.
The Ethernet communication adapter requires connection to a BOOTP server for
conguring the module’s IP parameters, including its own unique IP address, default
gateway, and sub-net mask. These parameters are stored in the communication
adapter’s ash memory. Schneider Electric automation business offers BOOTP Lite
Ethernet software as a free download from the Schneider Electric web site at
www.schneider-electric.us.
Description
The front panel of the 170 ENT 110 0p Ethernet communication adapter features:
1 Ethernet RJ45 connector for 100BASE-TX interface for 170 ENT 110 01) or
10BASE-T interface for 170 ENT 110 02)
2 Area for Label (label shipped with I/O base)
3 LED Status Indicators for the 170 ENT 110 02 display include:
Run (green), module health-
LAN Active (green), Ethernet network status-
LED Status Indicators for the 170 ENT 110 01 display include:
Run (green), module health-
10T (green), 10 Mbit/s network activity-
100T (amber), 100 Mbit/s network activity-
ST (green), Ethernet network status-
3
2
1
Introduction,
description