Installation manual

21InRow RC Installation Manual
Installation
Removing the Doors and Panels
Removing the front and rear doors
1. Unlock and open the door 90 degrees.
2. Unplug the ground wires and display
connection cables.
3. Lift the door up and off the hinges.
WARNING
MOVING PARTS HAZARD
All doors and side panels must be locked during normal operation. Do not open the side
panels while the fans are operating.
Failure to follow these instructions can result in death, serious injury, or
equipment damage.
NOTICE
EQUIPMENT DAMAGE
• Unplug the display interface cables.
• Do not lean the doors against a wall with the side panel latches facing the wall. This can
deform the latches and prevent them from properly working.
Failure to follow these instructions can result in equipment damage.
na2010a