Specifications

37
Characteristics,
references
Advantys STB
Distributed I/O Solution 1
Parallel Interface for TeSys Model U
Applications
Characteristics
Module Type STB EPI 2145
Hot swapping
Yes
Connection
Via 4 RJ45 connectors
Power Supply
Via STB PDT 3100 c 24 V power distribution module
Protection
Via STB PDT 3100 power distribution module fuse
Consumption On
c 5 V logic bus mA 130
On
c 24 V sensor bus mA max. 100
On
c 24 V actuator bus mA max. 50 (with all 8 outputs at 0 state), max. 1,000 (with all 8 outputs at 1 state)
Characteristics of Inputs
Number of inputs 12
Nominal values Voltage
c V 24
Type Type IEC/EN61131-2
Type 1
Limit values At state 1 Voltage
V 15...30
Current
mA min. 2
At state 0 Voltage
V - 3...+ 5
Current
mA max. 0.5
Protection
Resistor-limited
Characteristics of Outputs
Number of outputs 8
Nominal values Voltage
c V 24
Current
mA 100 per channel, 850 per module
Limit values Permanent voltage
V 19.2...30
Absolute voltage
V 36
Peak voltage
A 1 for 100 µs per channel
Max. loads Capacity
µF 50
Inductance
0.5 Henry at 4 Hz
Short circuit and overload protection
Yes, per channel
References
Parallel Interface for TeSys model U starter-controllers
Type of Power
Supply
Voltage Reference Weight
kg
c 24 V STB EPI 2145 0.165
STB EPI 2145
S
TB XBA 3000
Separate parts
Description Use Sold in lot of Reference Weight
kg
Base 28.1 mm Application-specific
module mounted on
DIN rail
1 STB XBA 3000 0.048
Keying Pin For
application-specific
module
60 STB XMP 7700 –
User-customizable
labels sheets
Customization
of modules and
bases
25 STB XMP 6700 –
Description Use Length Reference Weight
kg
Connection cables
An RJ45 connector at
each end
Linking the
STB EPI 2145
module to the
model U
starter-controller
0.3 m LU9 R03 0.045
1 m LU9 R10 0.065
2 m 490 NTW 000 02 –
3 m LU9 R30 0.125
5 m 490 NTW 000 05 –
12 m 490 NTW 000 12 –
P
resentation:
p
age 36
Description:
page 36
Dimensions:
page 36