Specifications
35
Characteristics,
references
Advantys STB
Distributed I/O Solution 1
Parallel Interface for Tego Power Applications
(1) For other Tego Power components, refer to our catalog: “Motor-starter solutions, control and
power protection components”.
(2) For a set of 8 motor-starters, use 2 APP 2R4E splitter boxes.
Characteristics
Electrical characteristics
Module Type STB EPI 1145
Plug in/plug out with power on
Yes
Connection
Via 1 HE 10 connector (30 contacts).
P/S
Via STB PDT 3100 c 24 V power distribution module
Protection
Via STB PDT 3100 power distribution module fuse
Consumption On
c 5 V logic bus mA 130
On
c 24 V sensor bus mA max. 100
On
c 24 V actuator bus mA max. 50 (with all 8 outputs at 0 state), max. 1,000 (with all 8 outputs at 1 state)
Characteristics of inputs
Number 16 (8 for the status of each contactor/ 8 for the status of each circuit-breaker)
Nominal values Voltage
c V 24
Type IEC/EN 61131-2
Type 1
Limit values At state 1 Voltage
V 15...30
Current
mA min. 2
At state 0 Voltage
V - 3...+ 5
Current
mA max. 0.5
Protection
Resistor-limited
Characteristics of outputs
Number 8 (8 to control each contactor)
Nominal values Voltage
c V 24
Current
mA 100 per channel, 850 per module
Limit values Permanent voltage
V 19.2...30
Absolute voltage
V 36
Peak voltage
A 1 for 100 µs per channel
Max. loads Capacity
µF 50
Inductance
0.5 Henry at 4 Hz
Short circuit and overload protection
Yes, per channel
References
Parallel interface for TeSys model d motor-starters with Tego Power system
Power Supply
type
Voltage Reference Weight
kg
c 24 V STB EPI 1145 0,120
STB EPI 1145STB XBA 2000
Separate parts
Description Use Sold in lots of Reference Weight
kg
Base 18.4 mm Application-specific
module mounted on DIN
rail
1 STB XBA 2000 0.024
Keying pin For application-specific
module
60 STB XMP 7700 –
User-customizable
labels sheets
Customization of modules
and bases
25 STB XMP 6700 –
Description Use Length Reference Weight
kg
Connection cables
(30-pin at each end)
From the power splitter box
and APP 2R
pE control to
the STB EPI 1145 module
1 m STB XCA 3002 –
2 m STB XCA 3003 –
Tego Power separate elements (1)
Description Use Reference Weight
kg
Power and control
splitter boxes
2 outputs APP 2R2E –
4 outputs (2) APP 2R4E –
P
resentation:
p
age 34
Description:
page 34
Dimensions:
page 34