Specifications

28
Presentation,
description
Advantys STB
Distributed I/O Solution 1
Analog Input/Output Modules
The STB analog inputs allow the acquisition of various analog values encountered in
industrial applications.The STB analog outputs are used to control analog field
devices such as variable speed drives, proportional control values, etc.
The analog I/O offering is defined as follows:
b 3 analog input modules:
v one with 2 ± 10 V, single-ended analog input channels,
v one with 2 0…20 mA, single-ended analog input channels,
v one with 2 thermocouple, “RTD” or mV channels.
b 2 analog output modules:
v one with 2 single-ended analog output channels configurable for 0…10 V or
±10V,
v one with 2 single-ended analog current output channels at 0…20 mA.
A typical analog input/output module comprises of the following:
1 A location for user-customizable label.
2 A display block showing:
v the state of the module (RDY, ERR),
3 A color-coded module identification stripe.
4 Two receptacles for field-wiring connectors.
To be ordered separately:
b I/O bases width 13.9 mm STB XBA 1000. The base features a location for the
user-customizable label.
b Removable screw terminal (6-point) STB XTS 1100 or removable spring terminal
(6-point) STB XTS 2100.
b Mechanical keying pin to insert between:
v the I/O module and this I/O base: STB XMP 7700,
v the field wiring connector and this I/O module: STB XMP 7800,
to ensure that the I/O module, I/O base and field wiring connector are properly
matched.
b User-customizable labels sheets: STB XMP 6700.
Presentation
Description
1
2
3
4
C
haracteristics:
p
ages 29 and 30
References:
page 31
Dimensions:
page 31
Wiring:
pages 32 and 33