Specifications

18
Presentation,
description
Advantys STB
Distributed I/O Solution 1
Digital Input/Output Modules
The STB digital input/output modules consist of input modules, output modules, and
relay output modules.
The digital I/O offering is defined as follows:
b 5 digital input modules:
v one 2-channel module, one 4-channel module, and one 6-channel module with
24 VDC voltage,
v one 2-channel module with 115 VAC voltage,
v one 2-channel module with 230 VAC voltage.
b 5 digital output modules:
v two 2-channel modules, one 4-channel module, and one 6-channel module with
24 VDC voltage,
v one 2-channel module with 115/230 VAC voltage.
b 2 relay output modules:
v one 2 form C relay outputs,
v one 2 form A/B relay outputs.
A typical digital input/output module comprises the following:
1 A location for user-customizable label.
2 A display block showing:
v the state of the module (RDY, ERR),
v the state of channel (INp or OUTp).
3 A color-coded module identification stripe.
4 Two receptacles for field-wiring connectors.
To be ordered separately:
b I/O bases width 13.9, 18.4 or 28.1 mm, depending on the model of I/O module
STB XBA 1000/2000/3000.These bases feature a location for the user-customizable
label.
b Removable screw terminal (5 or 6-channel) STB XTS 1110/1100 or removable
spring terminal (5 or 6-channel) STB XTS 2110/2100.
b Mechanical keying pin to insert between:
v the I/O module and this I/O base: STB XMP 7700,
v the field wiring connector and this I/O module: STB XMP 7800,
to ensure that the I/O module, I/O base and field wiring connector are properly
matched.
b User-customizable labels sheets: STB XMP 6700.
Presentation
Description
1
2
3
4
C
haracteristics: :
p
ages 19 to 21
References:
page 22
Dimensions:
page 23
Wiring:
pages 23 to 25