Specifications

16
Selection guide
Advantys STB
Distributed I/O Solution 1
Digital Input/Output Modules
Configuration Input modules
For direct current For alternating current
Voltage 24 VDC 115 VAC 230 VAC
Number of channels 2 4 6 2
Input Logic Sink –
Type (IEC/EN 61131-2) Type 2 Type 1+ Type 1 Type 1
Load current/channel (outputs) –
Response time Off-to-on 610 µs @
0.2 ms input
filter time
925 µs @
0.5 ms input
filter time
1.21 ms 1.5 line cycles
On-to-off 625 µs @
0.2 ms input
filter time
1.35 ms @
0.5 ms input
filter time
1.74 ms 1.5 line cycles
Filter time constant 0.2...16 ms 0.5...16 ms 1 ms – –
Field wiring connectors Two connectors (6-point):
screw-type STB XTS 1100 or
spring-type STB XTS 2100
Two connectors (5-point):
screw-type STB XTS 1110 or
spring-type STB XTS 2110
Base STB XBA 1000 STB XBA 2000
Power Distribution Modules
“PDM” (1)
Voltage 24 VDC 115 VAC 230 VAC
Part number STB PDT 3100 STB PDT 2100
Isolation Field-to-bus 1500 VDC for 1 minute 1780 VAC for 1 minute
Channel-to-channel – –
Protections against Reverse polarity Yes
Short circuit and overload Yes, 5 A time-lag fuse on the Power Distribution Module “PDM”
Sensor/actuator power Electronic short-circuit protection (SCP)
Model number
STB DDI
3230
STB DDI
3420
STB DDI
3610
STB DAI
5230
STB DAI
7220
Page 22
(1) Each voltage groupe requies its own Power Distribution Module “PDM”.