Specifications

9
Description
Advantys STB
Distributed I/O Solution 1
Network Interface Modules
They feature the following on the front panel:
1 A connector used to connect the island to the fieldbus. See the various connector
types on page 9.
2 Two rotary node addressing selectors on the bus or the network.
3 An external
c 24 V power connector for the removable screw-type
(STB XTS 1120) or spring-type (STB XTS 2120) connector.
4 A display block with LEDs for the various island states on the bus: power,
communication, send/receive data, errors, etc.
5 Locking screw for the STB N
pp 2212 module of DIN rails.
6 A drawer (1) for an STB XMP 4440 removable memory card.
7 Cover (1) accessing the port used to connect an island setup and configuration
PC or an HMI screen (read/write data), and the Reset button.
It is identical to the network interface modules described above except for the
INTERBUS connector.
It features the following on the front panel:
1 A 9-pin SUB-D male connector used to connect the input bus cable.
2 A 9-pin SUB-D female connector used to connect the output bus cable.
3 An external
c 24 V power connector for the removable screw-type
(STB XTS 1120) or spring-type (STB XTS 2120) connector.
4 A display block with LEDs for the various island states on the bus: power,
communication, send/receive data, errors, etc.
5 Locking screw for the STB N
pp 2212 module of DIN rails.
6 A drawer (1) for an STB XMP 4440 removable memory card.
7 Cover (1) accessing the port used to connect an island setup and configuration
PC or an HMI screen (read/write data), and the Reset button.
Network interface modules are provided with the STB XMP 1100 bus terminator and
are mounted directly on DIN rails.
(1) Not available with STB NCO 1113 Economy CANopen module.
Description
Network interface modules (except for the INTERBUS STB NIB 2212 module)
1
2
3
4
5
6
7
INTERBUS STB NIB 2212 network interface module
1
2
3
4
5
6
7
C
haracteristics:
p
age 10
References:
pages 11 to 13
Dimensions:
page 13