Quick start manual

Premium and Advantys STB on Profibus DP.doc – Juni-05

Schneider Electric

Hardware

General

• For assembly purposes, the power supply and Advantys STB require a top-hat rail.

• The other devices can be attached directly to the mounting plate.

• A 230 V AC cable is used between the emergency off master switch, power supply,

variable speed drives, and motors.

• The 24 V DC cable is used between the power supply, PLC, Advantys STB, and

FTB.

• A CANopen cable must be used between Advantys STB, the variable speed drives

and the FTB modules. This involves using junction boxes (CAN Tab) to connect the

variable speed drives.

• Advantys STB and the PLC are connected via a Profibus cable.

Components

Master switch

VCF-02GE

Power supply

ABL7RE2403

Continued on next page