Quick start manual
Premium and Advantys STB on Profibus DP.doc – Juni-05
Schneider Electric
6
Installation
Introduction
This chapter describes how to install the hardware and set up the software for the
task associated with the following applications:
Layout
Note
Each of the drive island motors is controlled separately by the PLC. The I/O platform
(Advantys STB) and the I/O module with IP 67 protection (Advantys FTB) input
signals can also be used for this purpose. The outputs of these modules are used to
control additional devices.
Note:
As the variable speed drives are controlled via a state machine (DriveCom profile),
the drives cannot be controlled manually using a local HMI without a PLC. If an HMI
is to be used in conjunction with the drive island, the island can only be controlled
with the aid of a PLC (manual operator action).