Quick start manual

Premium and Advantys STB on Profibus DP.doc – Juni-05

Schneider Electric

Configuring the

ATV31s,

continued

The following table provides an overview of how the ATV31 behaves depending on the

different configuration methods:

Parameters configured

by…

…Advantys …PowerSuite,

...control keys

…both

ATV31 restart

Advantys PowerSuite Advantys

Island restart

Advantys PowerSuite Advantys

Island & ATV31 restart

Advantys PowerSuite Advantys

CANopen bus error

Advantys PowerSuite Advantys

IO scanning/PLC error

Advantys PowerSuite Advantys

Misconfigura-

tions on the

CANopen

extension

Below is a description of how the bus behaves in the event of potential

misconfigurations, particularly addressing errors:

Error Description

Duplicate bus address The two devices with the duplicate address are excluded

from bus operation and no data can be exchanged with

them. Data exchange with all the other devices continues

as normal and is unaffected by this fault.

Device has the same

address as

XBE 2100

If a device on the bus has the same address as the XBE

2100 extension module, the bus will fail to start and no data

will be exchanged.

Note:

In both cases, the relevant diagnostic message will be displayed in the Advantys

software or on the island head Web page to enable the error to be detected on startup.