Quick start manual

Premium and Advantys STB on Profibus DP.doc – Juni-05
Schneider Electric 36
Overview of
addresses
Overview Description
The tables provide an overview of
the example application I/O data;
both the PLC and the I/O platform
(Advantys STB) addresses are
given. In the case of the I/O
platform, the addresses available
externally are given. By contrast,
the internal CANopen extension
addresses are not given.
Note: On the PLC side, two data
structures are defined for
communication with the ATV31,
each of which contains two integer
values. The first of these values is
the control word used to convey the
motion commands and the second
is used to specify the speed.
As well as assigning addresses and
variables directly, the example
project also contains a section
(Data_Assignment) that allows the
assignment to take place via
blocks. This is necessary if the
types of the declared variables do
not match the address types.