Quick start manual

Premium and Advantys STB on Profibus DP.doc – Juni-05
Schneider Electric 33
Configuring
the bus,
continued
5
The arrangement of
components in the Advantys
island must now be entered for
the slave. Double-click to open
the slave module. All of the
island’s elements can be
selected from a list, but the
sequence of the elements
must be taken into account.
The elements can be selected
from the list by name or as
standard devices with defined
input and output areas;
double-clicking on an element
means that it becomes the
next island element in the
lower list.
Note: Currently, the ATV31
and the FTB modules can only
be selected as standard
devices. For the ATV31, select
a standard device with two
input and two output words;
FTB modules have 1 output
byte and five or six input
bytes.
6
Finally, save the project and
create an export file for the
PLC project via the “Export”
menu item in the “File” menu.