Quick start manual

Premium and Advantys STB on Profibus DP.doc – Juni-05
Schneider Electric 32
Configuring
the bus
1
The Sycon software package is used for Profibus implementation. Sycon
assembles the configuration data for Profibus and makes it available in the form of
a PLC programming software export file.
2
To create a project, select the
“New” menu item from the
“File” menu, or the equivalent
button, then select “Profibus”
as the bus type.
3
Add the PLC’s Profibus card to
the project as the master via
the “Master” menu item in the
"Insert" menu, or by using the
equivalent button. Select the
"TSX PBY 100" card in the
next selection window. A
Profibus address and a name
must also be entered.
4
Add the Advantys island to the
project as the slave via the
“Slave” menu item in the
"Insert" menu, or by using the
equivalent button. Select the
"STB NDP 2212" card in the
next selection window. A
Profibus address and a name
must also be entered.
Continued on next page