Quick start manual

Premium and Advantys STB on Profibus DP.doc – Juni-05
Schneider Electric 23
Connecting
the device
and reading
data,
continued
4
You must confirm the following
warning concerning the transfer
of parameters. The current
parameters will then be
transferred from the drive to the
software.
Parameteriz-
ing and
transferring
data
1
Once the transfer is complete,
the drive’s online screen will
appear.
In order to make parameter
settings, you must switch to the
configuration screen.
2
In the configuration screen, you
must, as a minimum, check the
line frequency parameters
(“BFR”) and motor parameters
(Settings/Drive Parameters –
Motor Characteristics) and
adjust them as necessary.
3
Next, close the configuration
view and, in the main window,
transfer the data to the drive by
selecting “Configure” from the
“Action” menu or by pressing
the equivalent button.
Continued on next page