Installation guide

Safety

890USE17100 September 2003 79

Clamp and Cable

Assembly

The grounding clamps are used to ground the shielding of the stripped cable to the

FE grounding bar. The assembly consists of attaching the grounding clamp to the

FE grounding bar, stripping the insulation off of the cabling to expose the braided

shield underneath and inserting it into the ground clamp. It is described in the

following procedure.

Step Action

1 Position the grounding clamp in front of the module who’s cable will be secured by it.

On the clamp: pull back on the spring loaded lock down bolt, slip the clamp onto the

grounding bar, and release to secure.