Installation guide

Safety
890USE17100 September 2003 77
4 Push the side brackets toward both ends of your segment so that they are snug
against its walls, and tighten the lock down screws.
5 Determine the grounding bar length by measuring the distance between the outsides
of the side bracket/segment assembly and add 1 cm. (this is a general rule for
grounding bar length. You can make adjustments to satisfy your particular needs).
Cut the bar to length.
The grounding bar is originally 1 M long x 18 mm wide x 3 mm thick tinned copper.
To order extra grounding bars alone contact a local supplier.
Step Action
Lockdown screwLockdown screw
X
X+1cm