Installation guide

Safety
890USE17100 September 2003 75
The Kits There are three kits you can use to ground your shielded cable. To do an initial set
up you need STB XSP 3000 and at least one of the cable clamp kits (STB XSP 3010
or STB XSP 3020). STB XSP 3010 comes with ten cable clamps for 1.5 mm to
6.5 mm size cable. STB XSP 3020 comes with ten cable clamps for 5 mm to 11 m
size cables.The three kits are illustrated in the table below.
Kit Comes with...
STB XSP 3000 two side brackets, one 1 m grounding bar and one FE grounding clamp
STB XSP 3010 10 small cable clamps for 1.5mm to 6.5mm cable
STB XSP 3020 10 medium cable clamps for 5mm to 11mm cable
Side brackets
FE grounding clamp
Grounding bar