Installation guide

Installation
56
890USE17100 September 2003
How to
Terminate the
Primary Segment
Use the following procedure when you terminate the island bus at the end of the
primary segment.
Step Action
1 Find the STB XMP 1100 termination plate that you set aside when you unpacked
your NIM.
If you cannot locate the plate that shipped with the NIM, it can be ordered by its
STB XMP 1100 model number as a standalone accessory.
2 Align the interlocking channels at the top and bottom left of the termination plate
with the channels on the right side of the last I/O base.
3 Using the interlocking channels as guides, slide the plate toward the DIN rail until
it snaps onto the rail.