Installation guide
Installation
890USE17100 September 2003 51
2 Push the key, still attached to the STB XMP 7800 pinwheel all the way into the key slot
on the connector plug. Lift or twist the pinwheel enough to break the key off of the
wheel. Do this to as many key slots as your keying scheme dictates.
3 Push a key attached to the STB XMP 7810 pinwheel into the key slot on the
receptacle on the front of the PDM. Then twist the pinwheel enough to break the key
off of the wheel. Do this to as many key slots as your keying scheme dictates.
Step Action
STB XMP 7800
STB XMP 7810