Installation guide

Installation

890USE17100 September 2003

Suggested

Design Example

The following illustration shows a typical island system with one segment (the

primary segment) terminated with a STB XMP 110 termination plate. Item 3,

marking labels, are a suggested part of your design plan. They can be ordered from

the Schneider catalog.

1 The DIN rail mounting surface and Earth grounded grid.

2 The primary segment.

3 Marking labels (STB XMP 6700).

4 Functional Earth (FE) grounding point.

5 Suggested label position (these labels are not provided by Schneider).

6 Grounding bar from an EMC kit. Used as a FE point for shielded cables and as a cable

stabilizer.

7 A cable channel.

8 Large braided cable to Earth ground.

9 Protective Earth (PE) grounding point. Make this as close as possible to the I/O.

21 3