Installation guide

Site Requirements

890USE17100 September 2003

Environmental

Requirements

This equipment meets agency certification for UL, CSA, CE and FM class 1 div 2.

This equipment is intended for use in a Pollution Degree 2 industrial environment, in

over-voltage Category II applications (as defined in IEC publication 60664-1), at

altitudes up to 2000 m (6500 ft) without derating.

Parameter Specification

protection ref. EN61131-2 IP20, class 1

agency ref. EN61131-2 UL 508, CSA 1010-1, FM Class 1 Div. 2,

isolation voltage ref. EN61131-2 2000 VDC field-to-bus for 24 VDC

3250 VDC field-to-bus for 115/230 VAC

Note: No internal isolation voltage; isolation requirements must

be met by using SELV-based external power supply.

over-voltage class ref. EN61131-2 category II

operating temperature 0 ... 60° C (32 ... 140° F)

storage temperature -40 ... +85° C (-40 ... +185° F)

operating humidity 95% relative humidity @ 60° C (noncondensing)

nonoperating humidity 95% relative humidity @ 85° C (noncondensing)

supply voltage variation,

interruption, shut-down and

start-up

IEC 61000-4-11

damped oscillatory wave IEC 61000-4-12

sinusoidal vibration 5 ... 20 Hz with 6.35 mmDA

20 ... 500 Hz with 5 g

shock ref. IEC88, part 2-27 30 g half sine

operating altitude 2000 m (2187 yd)

transport altitude 3000 m (3281 yd)

free-fall ref. EN61131-2 1 m (1.09 yd)