Specifications

How to Configure the Island
60
EIO0000000051 6/2010
Setting the Size and Display Format of HMI-to-PLC and PLC-to-HMI Tables
Description
Use the Parameters page of the STB NIP 2311 module editor to:
z Set the reserved size (in 16-bit words) for the HMI-to-PLC table and PLC-to-HMI
table.
z Display data on the Parameters page in either decimal or hexadecimal format.
The Parameters page:
Reserved Sizes (HMI and PLC)
HMI-to-PLC: The network interprets data from the HMI as input and reads it from
the input data table in the process image. When the reserved size (HMI to PLC) is
selected, the range of available data sizes (in words) is displayed. The space you
reserve for HMI to PLC data must not exceed the maximum value shown (512
words).
PLC-to-HMI: The network transmits data to the HMI as output by writing it to the
output data table in the process image. When the reserved size (PLC to HMI) is
selected, the range of available data sizes (in words) is displayed. The space you
reserve for the PLC to HMI data must not exceed the maximum value shown (512
words).
STBNIP2311
General Parameters Ethernet Parameters Ports OptionsIO Image Diagnostics
Data Item Name Configured Value User Defined Label
Restore Default Values
ApplyOK Cancel
Module Help
Configure object dictionary entries.
NIM Parameters List
Reserved Size (Words) of HMI to PLC Table
Reserved Size (Words) of PLC to HMI Table
0
0
Hexadecimal