Specifications

How to Configure the Island

EIO0000000051 6/2010

Installing the Card

Use the following procedure to install the memory card:

Step Action

1 Punch out the removable memory card from the plastic card on which it is

shipped.

Make sure that the edges of the card are smooth after you punch it out.

2 Open the card drawer on the front of the NIM. If it makes it easier for you to work,

you may pull the drawer completely out from the NIM housing.

3 Align the chamfered edge (the 45° corner) of the removable memory card with

the one in the mounting slot in the card drawer. Hold the card so that the chamfer

is in the upper left corner.

4 Seat the card in the mounting slot, applying slight pressure to the card until it

snaps into place. The back edge of the card must be flush with the back of the

drawer.

5 Close the drawer.