Specifications

How to Configure the Island
EIO0000000051 6/2010 53
How to Install the STB XMP 4440 Optional Removable Memory Card
Introduction
The card’s performance can be degraded by dirt or grease on its circuitry.
Contamination or damage may create an invalid configuration.
The STB XMP 4440 removable memory card is a 32-kbyte subscriber identification
module (SIM) that lets you store (see page 236), distribute, and reuse custom island
bus configurations. If the island is in edit mode and a removable memory card
containing a valid island bus configuration is inserted in the NIM, the configuration
data on the card overwrites the configuration data in Flash memory, and is adopted
when the island starts up. When the island is in protected mode, it ignores the
presence of a removable memory card. (Only users with the STB NIP 2311 NIM can
save configuration data to the removable memory card. With that NIM, valid
configuration data on the card overwrites the data in flash memory, even in
protected mode.)
The removable memory card is an optional Advantys STB feature.
Remember:
z Keep the card free of contaminants and dirt.
z Network configuration data, such as the fieldbus baud setting, cannot be saved
to the card. (The exception is the STB NIP 2311 NIM.)
CAUTION
LOSS OF CONFIGURATION: MEMORY CARD DAMAGE OR CONTAMINA-
TION
z Use care when handling the card.
z Inspect for contamination, physical damage, and scratches before installing the
card in the NIM drawer.
z If the card does get dirty, clean it with a soft dry cloth.
Failure to follow these instructions can result in injury or equipment damage.