Specifications
Glossary
EIO0000000051 6/2010 273
standard I/O
Any of a subset of Advantys STB input/output modules designed at a moderate cost
to operate with user-configurable parameters. A standard I/O module may be
reconfigured with the Advantys Configuration Software and, in most cases, may be
used in reflex actions.
standard network interface
An Advantys STB network interface module designed at moderate cost to support
the configuration capabilities, multi-segment design and throughput capacity
suitable for most standard applications on the Island bus. An Island run by a
standard NIM can support up to 32 addressable Advantys STB and/or preferred I/O
modules, up to 12 of which may be standard CANopen devices.
standard power distribution module
An Advantys STB module that distributes sensor power to the input modules and
actuator power to the output modules over two separate power buses on the Island.
The bus provides a maximum of 4 A to the input modules and 8 A to the output
modules. A standard PDM requires a 5 A fuse to protect the input modules and an
8 A fuse to protect the outputs.
STD_P
standard profile. On a Fipio network, a standard profile is a fixed set of configuration
and operating parameters for an agent device, based on the number of modules that
the device contains and the device’s total data length. There are 3 types of standard
profiles: Fipio reduced device profile (FRD_P), Fipio standard device profile
(FSD_P), and the Fipio extended device profile (FED_P).
stepper motor
A specialized DC motor that allows discrete positioning without feedback.
subnet
A part of a network that shares a network address with the other parts of a network.
A subnet may be physically and/or logically independent of the rest of the network.
A part of an internet address called a subnet number, which is ignored in IP routing,
distinguishes the subnet.
surge suppression
The process of absorbing and clipping voltage transients on an incoming AC line or
control circuit. Metal-oxide varistors and specially designed RC networks are
frequently used as surge suppression mechanisms.