Specifications

Glossary
258
EIO0000000051 6/2010
Drivecom Profile
The Drivecom profile is part of CiA DSP 402 (profile), which defines the behavior of
drives and motion control devices on CANopen networks.
E
economy segment
A special type of STB I/O segment created when an STB NCO 1113 economy
CANopen NIM is used in the first location. In this implementation, the NIM acts as a
simple gateway between the I/O modules in the segment and a CANopen master.
Each I/O module in an economy segment acts as a independent node on the
CANopen network. An economy segment cannot be extended to other STB I/O
segments, preferred modules or enhanced CANopen devices.
EDS
electronic data sheet. The EDS is a standardized ASCII file that contains information
about a network device’s communications functionality and the contents of its object
dictionary. The EDS also defines device-specific and manufacturer-specific objects.
EIA
Electronic Industries Association. An organization that establishes
electrical/electronic and data communication standards.
EMC
electromagnetic compatibility. Devices that meet EMC requirements can operate
within a system’s expected electromagnetic limits without interruption.
EMI
electromagnetic interference. EMI can cause an interruption, malfunction, or
disturbance in the performance of electronic equipment. It occurs when a source
electronically transmits a signal that interferes with other equipment.
EOS
This abbreviation stands for end of segment. When more than 1 segment of I/O
modules is used in an Island, an STB XBE 1000 or an STB XBE 1100 EOS module
is installed in the last position in every segment that has an extension following it.
The EOS module extends Island bus communications to the next segment. Which
EOS module must be selected depends on the module types that shall follow.