Specifications

STB NIP 2311 Services
EIO0000000051 6/2010 177
The Reboot Page
Introduction
The reboot operation re-applies the Advantys island’s operating parameters (that
were stored in flash memory) to all island devices.
During the reboot operation, the STB NIP 2311 is temporarily disabled:
Executing a Reboot Operation
Reboot the STB NIP 2311, after first accessing the module’s web pages
(see page 145):
NOTE: Issuing a reboot will read and apply the rotary switch position.
Reboot causes the STB NIP 2311 to
become non-operational temporarily during
the reboot process.
Reboot
Monitoring Control Diagnostics Maintenance Setup
REBOOT Help
Step Action
1 Click on the Control menu command to open the Control page.
2 On the left side of the page, select Reboot to open the Reboot page.
3 Click the Reboot button.